<menu id="cemo0"><tt id="cemo0"></tt></menu>
  • <menu id="cemo0"><tt id="cemo0"></tt></menu>
  • <menu id="cemo0"><strong id="cemo0"></strong></menu>
    <menu id="cemo0"><tt id="cemo0"></tt></menu><nav id="cemo0"><nav id="cemo0"></nav></nav>
  • <menu id="cemo0"><strong id="cemo0"></strong></menu>
  • T系列智能機械式多層升降停車庫專用減速機 T series gear motor for intelligent nulti-layer car parking system

    采用三合一方式:減速器、電機、制動器組成一體減速機。

    Three-in-one mode is adopted: reducer, motor and brake form an integrated gear motor.

    制動器采用平面彈簧加壓電磁制動,制動率182%,快速剎車為0.05s至0.07s,非石棉物剎車盤干式摩擦,整體剎車制動器配置鈦質蓋板防止潮濕剎車失靈,帶手動釋放(自動返回制動位置),可保全天滿負荷運轉工作。全波切換半波快速制動整流器輸入電壓270VAC 50/60Hz,絕緣耐壓1800VAC 50Hz 1min,剎車100萬次壽命。

    The brake adopts flat spring-loaded electromagnetic brake.Its braking rate is 182%, and quick brake time is 0.03s to 0.05s. The fast brake locking value is less than 5cm.With the non-asbestos brake disc dry friction, the overall brake is equipped with titanium cover plate to prevent the damp brake from malfunctioning, which can keep working at full load all day. The input voltage of the fast brake rectifier is 270VAC 50/60Hz, the insulation withstand voltage is 1800VAC 50Hz 1min, and the service life is 1 million times.

    電機采用散熱系統條紋,全部銅質線材銅漆包線通過深層浸漆,絕緣等級F與H,防護等級F與H,防護等級IP55,工作制S1運轉,防潮防塵全密封式。適用室外工作環境+80℃至-25℃,不宜直射腐蝕物體,功率大于1.2倍國標值。

    The motor adopts aluminum alloy hot high-pressure casting, all copper wire copper enameled wire through deep dipping, insulation class F, protection class IP55, working system S1 operation, moisture-proof and dust-proof fully sealed. Suitable for outdoor working environment +80 ℃ to -25 ℃, and not suitable for direct corrosion of objects, the motor power is more than 1.2 times the national standard value.

    專用減速機由斜齒輪與螺旋齒輪組合直角90°輸出傳動,帶自鎖65%以上,采用高性質20CrMnTi齒輪鋼,經滲碳處理確保硬齒面與強度,對齒輪進行數控精磨加工而成,保證齒輪硬度與精度技術要求,機械傳動效率高。適宜室外環境運行工作,減速機負載運行噪音低于65 dB(A),全密封無漏油,采取免維修零故障設計方法。

    The special reducer (reduction motor) uses 20CrMnTi gear steel, which is carburized to ensure the hard tooth surface and strength, and is processed by CNC precision grinding to ensure the technical requirements of gear hardness and accuracy. Reducer load operation noise is less than 52dB (A), fully sealed and no oil leakage, maintenance-free and zero-fault design method is adopted.

    點擊下載樣本

    成年女人免费视频播放7777_成年女人免费碰碰视频_成年女人免费毛片视频永久vip